Description
Tesla TPMS丨Stay Ahead with Precision, Convenience, and Safety
As your Tesla crosses the 4 to 5 year ownership mark, factory TPMS batteries typically reach end-of-life. Drifting readings or sudden warning lights can disrupt daily commutes and long trips. The TESERY BLE Bluetooth TPMS is a direct, cost-effective replacement for aging OEM sensors, delivering accurate, real-time tire health data to your smartphone without dealership visits.
FitmentModel 3/Y (Oct 2020+) & S/X Refresh
ConnectionBLE Direct to Companion App
Lifespan5+ Years Sealed Battery
Install10-Minute DIY Setup1-Year Warranty | 30-Day Returns | 4.8/5 Rating (2,300+ Owners)
Why Upgrade to TESERY BLE TPMS
Real-Time Monitoring
Track pressure and temperature via a lightweight BLE app. No OBD dongles or coding required.
Stable Connection
BLE 5.0 protocol ensures consistent, low-latency transmission even at highway speeds.
Pre-Programmed
Factory-calibrated for Tesla. Auto-pairs on first drive with zero manual setup.
Long Battery Life
Sealed high-capacity cell matches or exceeds OEM longevity. Replace once, drive for years.
Plug-and-Play
Direct valve-stem swap. Standard wrench included. Complete installation in under 10 mins.
OEM-Level Accuracy
Tested to ±1.5 PSI. Meets SAE and DOT TPMS standards for daily reliability.
DIY Installation in 6 Steps
1
Loosen Wheel
Park on flat ground. Engage brake. Loosen lug nuts slightly before lifting.
2
Deflate & Remove
Press valve pin to release air. Unscrew existing cap and stem assembly.
3
Install Sensor
Hand-tighten TESERY sensor onto valve stem. Ensure rubber gasket seats flush.
4
Inflate to Spec
Fill to Tesla’s recommended PSI. Check for leaks with soapy water.
5
Secure & Verify
The sensor replaces the valve cap. Ensure snug fit. No extra cap is needed.
6
Drive & Pair
Drive 15+ mph for 5 mins. Open BLE app to auto-register and view live data.
Technical Specifications
-40℃ ~ 105℃Operating Temp-40℃ ~ 120℃Storage Temp0 ~ 116 PSIPressure Range±1.5 PSIPressure Accuracy±3℃Temp Accuracy5+ YearsBattery LifeBLE 4.2 / 5.0Wireless Protocol320mAh / 3VBattery Type (CR2032 Eq.)
Compatibility Guide
Tesla switched from RF to BLE TPMS in late 2020. Match your VIN date below.
| TPMS Protocol | Compatible Tesla Models |
|---|---|
| Bluetooth (BLE) (Part: 1490701-01-B) |
Model 3 (Oct 2020 – Present) Model Y (All trims, since Oct 2020) Model X / Plaid (Refresh, Oct 2021+) Model S / Plaid (Refresh, Jun 2021+) |
| RF 433MHz (Part: 1034602-00-A/C) |
Model 3 (2017 – Sept 2020) Model S (2012 – Jan 2021) Model X (2015 – Jan 2021) |
Check your door jamb sticker or VIN decoder to confirm manufacture date. The 10th character indicates the model year.
Frequently Asked Questions
① BLE Sensors Transmit Data: The BLE TPMS sensors inside your tires continuously monitor tire pressure and temperature. They wirelessly send this data using Bluetooth Low Energy (BLE) signals.
② Smartphone Receives and Processes Data: Your smartphone, with Bluetooth enabled, receives the data. You’ll need a compatible TPMS app to process and display the information.
③ Real-Time Information Displayed: The app will show real-time tire pressure and temperature readings for each tire, with color-coded warnings for low pressure, helping you take action before any issues arise.
① Solid TPMS Light: If the TPMS light stays on, it indicates that at least one of your tires has low pressure.
② Flashing TPMS Light: If the light flashes for 60 to 90 seconds when you start your car and then stays on, this means there’s a malfunction in your TPMS system. You should take your vehicle to a service center for an inspection.
Reviews
There are no reviews yet.