Description
Liberty Pumps 281-2 is a 1/2HP Automatic Submersible Sump/Effluent Pump with wide-angle quick-disconnect float switch (mercury-free, mechanically activated) and 25ft power cord. This Liberty Pump features a unique one-piece cast iron housing and thermally protected & permanently lubricated motor.
The switch of this pump is factory-preset and is not adjustable. Turn-on level of the switch is 13-1/2″ and turn-off level is 7″. Other pumping differentials may be obtained by tethering the switch cord to the discharge pipe. NOTE: A minimum cord length of 3-1/2″ from the tether point to the top surface of the float is required for proper switch operation. If using a differential other than the factory setting, be sure that when the pump shuts off, at least 3-1/2″ of fluid is left in the basin so the impeller remains submerged.
Liberty Pumps 281-2 has 1-1/2″ NPT discharge, 3/4″ solids-handling and 37′ shut-off head.
For added protection, consider the addition of a back-up pump such as Liberty’s SJ10 SumpJet, as well as an alarm such as Liberty’s ALM-2 in applications where loss of pump function could result in property damage. If an alarm is used, it must be connected to a separate electrical circuit.
CAUTION: Do not let the pump run dry.
Applications:
- De-watering
- Sump Applications
- Effluent Applications
Features:
- Vortex style impeller permitting passage of solids up to 3/4″
- 416 stainless steel rotor shaft
- Permanently lubricated upper and lower ball bearing
- Carbon and ceramic mechanical face seal
- Epoxy powder coat finish
- All fasteners – corrosion-resistant stainless steel
- 1-1/2″ Discharge
- Stainless steel bottom screen – easily removable
- Quick-disconnect 10′ standard power cord
- Maximum fluid temperature: 140°F
Technical Specifications:
- Horsepower: 1/2 HP
- Cord length: 25′
- Discharge: 1-1/2″
- Solids Handling: up to 3/4″
- Shut-off Head: 37′
- Voltage: 115V
- RPM: 3450
- Amps: 8.5
- Hertz: 60 Hz
- Phase: 1
- Maximum fluid temperature: 140°F
- Height: 13″
- Width: 10″
- Weight: 29 lbs.
- Minimum pit/basin diameter: 14″ in Sump and 18″ in Effluent applications
- Minimum pit/basin depth: 18″ in Sump and 24″ in Effluent applications
Warranty:
3 years manufacturer’s warranty
Reviews
There are no reviews yet.